Operation Of Planting Machine

Vegetable Planter adopts mechanical transplanting, which can ensure the same plant spacing, row spacing and depth for transplanting

  Vegetable Planter adopts mechanical transplanting, which can ensure the same plant spacing, row spacing and depth for transplanting, thereby improving the quality and quality of our crops, and also greatly improving the yield.

  The use of Vegetable Planter can make our farmland more tidy, the growth of crops is more planned, and management is more convenient. Planting Machine is the development trend of the new era. It will help us improve the cultivation of crops and increase our labor force, thereby increasing the output of our crops and carrying out the production of crops more scientifically.

When starting the engine, the operator of the Vegetable Planter must put the main clutch handle and the planting clutch handle to the separated position to cut off the power. When pulling the starting handle, try to pull a few times, put the starting rope to a low position, and push it to the inside. Pull to prevent hand bruising.

   When working on Vegetable Planter, keep the top of the floating plate clean. Prevent seedling floppy disks and other debris from entanglement on the drive shaft and rotating universal joint moving parts, affecting the work of the rice transplanter, and the operator is not allowed to use his feet to clean the soil and weeds between the walking wheel and the walking transmission box.

   According to the agronomic requirements of local planters, when adjusting the planter planting distance and the amount of seedlings, the engine must be turned off, stop working, adjust and clean the soil and weeds in the seedling door, and disconnect the main clutch when separating the seedling needles.

   Before the Vegetable Planter goes into the paddy field, carefully check and tighten the bolts on the back of the seedling box. The machine vibrates to prevent the nut from falling off and damage to the upper slide. When the planting machine turns to turn around, reduce the throttle and disconnect the planting clutch in time to prevent damage to the transmission universal joint parts.

The Planting Machine operator should stop taking seedling needles when reloading seedlings and sorting seedlings. When placing the seedlings, the machine hand should stay away from the seedling door to prevent the hand from being stabbed by the seedling needle. When crossing ditches and waterways, planks should be laid, and the throttle should be reduced and the handles should be used to pass slowly.