Attention To The Use Of Planting Machine

Vegetable Planter should inject oil into all oil filling points in time before working to ensure that the running parts are fully lubricated.

  1. Vegetable Planter should inject oil into all oil filling points in time before working to ensure that the running parts are fully lubricated. The missing or damaged parts should be supplemented, replaced and repaired in time. Be careful not to apply oil to the gears and chains, so as not to be covered with mud and increase wear.
  2. The working length of each seed wheel is equal and the displacement is the same. The seed rate adjustment mechanism is flexible, and there must be no sliding and empty movement.
  3. Disc opener The disc rotates flexibly, must not shake or rub against the opener body.
  4. Before and after each shift and during work, the soil in all parts should be cleaned up, paying special attention to removing the soil and oil on the transmission system.
  5. After the end of each shift, the fertilizer in the fertilizer box should be cleaned up to prevent the fertilizer from corroding the fertilizer box and the fertilizer discharge parts. Check whether the seed metering shaft and the fertilizer shaft rotate flexibly.
  6. After each shift, the Planting Machine should be parked in a dry and covered shed. When parking in the open air, cover the seed fertilizer box tightly. When parking, drop the opener, lower the support to support the machine body stably, and reduce unnecessary load on the frame of the planter.